Non Contact Clamp On Ultrasonic Flow Meter Wall Type For Liquid
Flow Measure
Introduction
The KUFS2000 series ultrasonic flow meter can be installed on the
wall or in instrument box, suitable for pipe sizes from DN25mm to
DN6000mm.
Features
High accuracy
1%
Wide range of flow rate and pipe diameter
Suitable for the pipe with DN15 to DN6000
High reliability
Working life is up to 10 years
Robust design
Differential signal driver and receiver, immune to low frequency
transformer and TV signal and transmission
Huge storage function
Support 512 days and 128 months and 10 years accumulated flow
result, auto save 64 times power on and off time and flow rate.
Auto save 32 days work status of the meter
Easy to used for calorimeter
Can be used as calorimeter after the temperature sensor is
installation
Remote transmission and net work transmission
RS485 interface support Mod-bus protocol and easy to support GPRS
or Zigbee networking
Basic Parameters
| Accuracy | ±1% |
| Velocity Range | 0~±10m/s, Bi-directional measurement |
| Pipe Size | DN15~DN6000 |
| Temperature | - 30~160℃ |
| Type of Liquid | Single liquid can transmit sound wave. such as water, sea water,
sewage, oil, chemicals , alcohol, etc |
| Pipe Material | Carbon steel, stainless steel 304, stainless steel 316. Flange
standard GB/T9119-2000, GB/T81-94 |
| Signal Output | 1 way 4-20mA output(impedance 0~1K, accuracy 0.1%) 1 way OCT pulse
output( Pulse width 6 ~ 1000ms) 1 way relay output |
| Signal Input | 3 way 4-20mA input, achieve to heat measurement by connecting PT100
platinum resistor. |
| Interface | RS485, support MODBUS |
| Data Storage | SD card regularly store the pre-set results (optional) |
| Power Supply | DC8~36V or AC85~264V |
Sensor selection
Sensor selection depend on the application field parameters such as
the diameter of the pipe the fix method the kind of the flow,
please refer to the fix method choice chapter for details.
Ordering information
Xi'an Kacise is certified by ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety
explosion-proof and isolated safety explosion-proof, etc. which
assure our products are conform to the international standards.
We have been specializing in manufacturing pressure, level and flow
measuring instruments and related products for 10 years. We have
experienced technical and management personnel, through the efforts
of our entire staff, we have become a professional measuring
instrument manufacturer and solution provider. And we are
continuously trying to improve product quality.
Currently, Kacise sensor is already exported to America, Spain,
Australia, Chile and 20 other countries and regions, and received
many favorable feedbacks. Our overseas distributers are also
increasing. We regards “reasonable prices, efficient production
time and good after-sales service” as our tenet, and hope to
cooperate with more customers for mutual development.
