Low Power Consumption Food Electromagnetic Flow Meter / RS485 /
Wireless Flowmeter
Features
1. Simple structures, firm, no movable parts and long operation
life.(Guarantee in 1 years)
2. No intercepting fluid parts, no pressure loss and fluid
clogging.
3. No mechanical inertia, quick response and good stability,
application in automatic examination, adjustment & controlling.
4. Measuring accuracy not influenced by physical parameters such as
style, temperature, viscosity, density and pressure.
6. Supply many styles of flow meters such as inline type and
insertion type, etc.Adopt EEPROM memory to measure operation data,
safe and reliable protection of memory.
7. High pressure sensor with PFA liner is resistant to high
pressure and negative pressure, and available to chemistry and
corrosive solution.
8. It is applicable not only to general process, but also in tough
applications such as mining, papermaking, pastry, etc.
Introduction
Electromagnetic Flow Meter is a kind of induction instrument designed by Faraday’s law of
electromagnetic induction to measure flow of conductive media in
the tube. It adopts the technology of insertion of single chip to
realize digital excitation and employs CAN local fieldbus.
Electromagnetic flow meter can realize local indication and output
electrical current signal of 4-20mA which can be used to record,
adjust and control. Electromagnetic flow meters are widely used in
industrial sectors such as chemical industry, environmental
protection, metallurgy, pharmaceutical, paper making, water supply
and removal etc.
Besides measuring flow of general conductive liquid electromagnetic
flow meter can measure flow of liquid-solid mixed fluid,
high-viscosity fluid and salt, strong acid and strong alkali.
Parameters
| Pipe diameter | DN6~DN2600 |
| Accuracy | 0.3% (Option), 0.5%, 1.0% of F.S.. |
| Repeatability | Below 0.25% |
| Power | AC: 220V, 50-60Hz; DC: +24V(Option) |
| Output Signals | 4~20mA, Pulse, 0~5V,0~10V, Low power only output RS485 |
| Conduit connection | M20 * 1.5 Thread |
| Communication Interface | RS-232; RS-485; HART |
| Operation Pressure | 1.0MPa, 1.6MPa, 4.0MPa, 16MPa (Special) |
| Fluid Temperature | -20°C~80°C, 80°C ~130°C, 130°C ~180°C Depending on Lining Material |
| Ambient Temperature | Sensor -40°C ~80°C. transducer -15°C ~50°C |
| Ambient Humidity | ≤ 85%RH (at 20C) |
| Cable Outlet Size | M20×1.5 |
| Power Supply | 220VAC±10%, 50-60Hz±1Hz, 24VDC±10%, Battery power (3-5years) |
| Power Consumption | ≤2W |
| Protection Ratings | Remote type: sensor IP68, transducer IP65. |
| Materials | Electrode | 316L (stainless steel), Hastelloy C, Hastelloy B,Titanium,
Tantalum, etc. |
| Liner | PTFE, Soft rubb er, Hard rubber, F46, FS, PUR. |
| Measuring tube | SS 304, carbon steel |
| Flange | Carbon Steal, SS304 |
| Ground ring | 316L (stainless steel), HC, Ti, Ta, Cu. |
| Connection of Flange | National Standard GB9119-88 (DIN2051, BS4504), JIS,ANSI. Screw. Tri-clamp for sanitary application Insertion type. |
| EX-proof protection | Exde ib ii BT2 |
| Quality control | ISO9001-2008, CE |
Model selection
